Skip to content

Free written estimatesLocal crews

Fresh concrete driveway beside a Vancouver Special house under soft grey light

Laneway houses, older lots, infill builds

Concrete contractor in Mount Pleasant, Vancouver

Slabs, steps, walkways and repairs for older Mount Pleasant homes and new infill. Send a few photos with your quote request and we will confirm availability.

  • Written quote before work starts
  • Drainage planned into every pour
  • Driveways, patios, slabs, steps and repairs
  • Free written estimates
  • Local crews
  • Clear timelines
  • Site cleanup included

Slabs and steps for a mix of old and new homes

Mount Pleasant is one of Vancouver's older neighbourhoods. Walk a few blocks and you pass heritage houses, Vancouver Specials, rowhouses, newer duplexes and laneway houses built in the last few years. Each type calls for different concrete: older houses need repairs to steps and paths, while infill sites need clean new slabs and tidy parking pads.

The neighbourhood has a lot of building activity, so a lot of our questions here are about matching new concrete to old, and fitting a job around construction that is already under way next door.

Hills, lanes and getting a truck to the work

The land in Mount Pleasant rises from the flats near False Creek, so many properties sit on a gentle slope, and the lane behind a house can be higher or lower than the front. A slab for a laneway house or garage has to be set carefully against that grade so water drains away rather than toward the walls.

Main Street, Kingsway and Broadway carry steady traffic, while side streets can be tight when cars line both sides. Truck positioning, lane width and overhead wires are things we ask about before booking a pour.

Our five kinds of concrete work, for Mount Pleasant sites

Most calls here fit one of these.

If a small garden path and a full laneway slab are on the same wish list, we can price them as separate items, so you decide what to do now and what to leave for later.

The biggest question on a lot here is often what is already underneath. Older sites can have buried fill, old foundations or abandoned lines, so a good plan leaves room for the unexpected.

  • Ground conditions. Clay and fill in places mean base preparation matters.
  • Grade. Slopes decide how steps, landings and drainage are laid out.
  • Neighbouring work. Shared fences and tight setbacks affect forms and access.
  • Scope of removal. Taking out old concrete adds time and haul-away.

We write these points into the scope, so nothing about the base or the removal comes as a surprise once digging starts.

Permits and preparation in a busy building area

Foundations, laneway houses and larger slabs normally involve permits and inspections, and the drawings come from the designer or builder. Our part is to pour to those drawings and to be ready for the inspector at the right stage. Smaller jobs, such as a garden walkway, may need nothing, but work at the lane edge or the street can need City approval.

It also helps to call a utility locate service before digging, since older blocks can hide lines that are not where you expect.

A short chat with the designer or builder before pouring usually clears up which inspections must happen first.

Requesting a Mount Pleasant concrete quote

Send the form or call (604) 555-0140. We cover Mount Pleasant from outside the neighbourhood, so the first step is simply finding out whether our schedule and your job line up.

  1. Describe the work and, if you have them, share drawings or a permit number.
  2. Upload photos of the lane, the yard and any existing concrete.
  3. We ask about access and any neighbouring construction.
  4. A site visit follows for anything beyond a simple repair.
  5. The written quote lists scope, finish and what is excluded.

A written quote after the visit keeps everything in one place for you and your builder.

Step 1 of 3

What do you need?

Questions about Mount Pleasant

Can you pour a slab for a laneway house in Mount Pleasant?

We can quote slab and footing work when the structural drawings and permit are in place. The slab follows the designer's specification, including thickness, reinforcing and insulation details. We will ask for the drawings first, since they decide what the job involves. If you are still at the design stage, talk to your designer before choosing a concrete contractor.

How do you match new concrete to an older step or path?

Colour and texture will rarely match exactly, because old concrete weathers over time. We can often match the finish pattern and edge style, and sometimes tint the mix. Where a close match matters, a joint line between old and new gives a clean break, and a sample area can show how the colours sit side by side.

Is a sloped lot a problem for a patio or parking pad?

Not usually, but it changes the plan. A gentle slope can help drainage, while a steeper one may need a retaining edge or steps. The slab is set so water runs away from the house and off the pad. Photos from a few angles, plus a note about where water currently pools, help a great deal.

What should I do about construction next door during a pour?

Tell us early. Adjacent builds can restrict lane access, block truck positions or leave debris and vibration near fresh concrete. We can schedule around known delivery times and protect edges. A quick chat with your neighbour or their builder usually solves most of it and prevents delays on the day. Ask us anything you are unsure about.

Do basement entry steps and stoops count as repair or replacement?

It depends on how damaged they are. Surface flaking and small cracks can often be repaired or resurfaced. If the step has pulled away from the wall, sunk, or crumbled through, replacement is more reliable. We check the base and drainage first, because new concrete placed over the same water problem will fail the same way.